HTTPS Certificate Setup

Creating Certificate:

Go to the web interface of your camera/recorder and go to Setting > System > Safety > HTTPS. Under HTTPS, select the create button under "Create Certificate". Fill out your countries initials, input the IP address of your device you are making the Certificate for and select create. Once back to the HTTPS page, select install, download and enable. After you save it, the unit will reboot.

Installing Certificate:

While the unit reboots, open the Certification that you downloaded previously and install it to your computer. Set store location as "Local Machine" and Make sure to Designate the install location as "Trusted Root Certification Authorities". Follow the rest of the prompts and it will tell you the import was successful. After it is complete, go to your IP address at 'https://xxx.xxx.xxx.xxx'. If it gives you an error then reinstall then repeat the installation again.