Changing Device IP's in a 4.0 NVR

To change Camera IP's from the NVR click Here

To change the IP settings on a network recorder go to:

Advanced Settings -> Network -> Click on 'Edit' icon

Once you click the edit icon this window will appear for the devices network settings.

Make your desired IP changes and click "OK" the device will change to that IP address

________________________________________________________________________________________________________________

Changing Camera IP's

This article assumes your camera's have been initialized. If it shows your cameras are uninitialized please refer to this article:  Initializing IP Camera

To change a camera IP in the recorder, go to Advanced Settings -> Camera Configuration -> Add/Remove Device 

Search for the device in the table above.

Once you find the camera in question, you can check the device and click "Modify IP"

Clicking Modify IP will give you a familiar window. Make your changes, click "OK" to save them, then run another device search to find the device with your new IP changes.