This in-depth article will go over how to enable P2P for your surveillance device. If you are unable to access the device. Please follow this guide on how to gain access to the recorder: How To Access Your NVR
This guide assumes you have possession of your NVRs username and password. If you do not have the password, please follow this link: Resetting a Recorder Password and Taking Ownership
Newer NVRs
This will be the standard interface for our modern recorders. Known as firmware version 4.0.
If your interface looks different please click here: P2P Access For Legacy NVRs.
1. Select Advanced Settings on the main menu
2. Select Network
3. Select Ok to save the settings
Remote Access The Device
Once all Settings have been made in your device you can test the P2P connection with our various software. Links to each method are below.
- IC Now: Adding Devices
- IC View+: Adding Devices and Sharing a Device
- ICRSS Pro/View: Adding A Device
- SmartICRSS Adding A Device
Troubleshoot
To troubleshoot the connection. Please click the link below:
Comments
0 comments
Article is closed for comments.