Storage Redundancy Mode

This will briefly go over IC Realtime's Redundant mode

Note: This feature is only available in some model NVRs.

 

If there are several HDDs installed on the NVR, you can set one of the HDDs as the redundant HDD to save the recorded footage.

If one of the HDDs becomes damaged, you can find the backup footage on the redundant HDD.

To enable redundancy mode, go to:

1 Select Main Menu > STORAGE > Disk Manager, and then set a HDD as redundant HDD.

2 Select Main Menu > STORAGE > Schedule > Record, and then select Redundancy

If the selected channel is not recording, the redundancy function will take effect.

If the selected channel is recording, the current recorded files will be packed, and then start recording according to the record schedule.

● This function is for some models only.
● The redundant HDD only backs up the recorded videos but not snapshots.

The only requirement for this particular feature is we recommend using a HDD that is the same size or greater.