ICM Initial setup

Default IP address:

The default IP address is 192.168.1.108. The server has no video output it is all web-based. Once it fully boots up please go to http://192.168.1.108/config to modify the IP address.

Default Config Portal Default Credentials:

User Configuration Page

User: admin

Password: 123456

(Please modify the password for this account)

Default Operator Portal Default Credentials:

User Configuration Page

Create an account specifically for viewing the devices via DSS Client. Do not use, "System" or "admin"

Default Admin Portal Default Credentials:

User Configuration Page

User: system

Password: 123456

(Please modify the password for this account)

Upgrading Firmware:

Please log in to the Admin / Config portal using the username "admin". Then go down to system upgrade, press browse and pick the .bin file provided from IC Realtime support.

Creating a role:

This step must be done before creating a user.

Please log in to the web interface of the ICM-7100 using the "system" username. Then you will go into account tab > role > press "+ Add" button.

• Input the "role name"
• Role level is on your determination of what level this role is in your server.
• A memo is a note for the server admin.
• Device rights are what rights this role will have over your recorders.
• System rights are for what rights this role will have in correlation to your ICM-7100SE.
• A channel tree is for what devices the role will be able to see and communicate to.

Creating a user:

Please log in to the web interface of the ICM-7100 using the "system" username. Then you will go into account tab > User > Press "+ Add" button.

• Make a username.
• Check the reusable box. (this will let you use the account at different locations)
• Select Organization.
• New password.
• And select the role this account will use.

ICM Client Default Login Credentials:

 

User Configuration Page

Create an account specifically for viewing the devices via ICM Client. Do not use, "System" or "admin"

Default Ports Information:

These Ports need to be open under the TCP protocol.

• Port 9000: CMS-Manage other server registration and signal deployment
• Port 9200: DMS-Responsible to login front encoder, receive an alarm, forward alarm, send an alarm and send calibration command
• Port 9100: MTS-Responsible to get A/V stream from the front device and forward to SS, client and decoding device.
• Port 9320: SS-Responsible for record storage and record search and playback
• Port 9500: ARS-Responsible to auto-register device listening, login and get and 9500 forward streams to MTS
• Port 9700: ASC-Responsible to resolve alarm scheme into ADS and some APP
• Port 9600: ADS-Response to send alarm info to different objects according to different schemes
• Port 9800: ADP-Responsible for cascading of the alarm business
• Port 9900: VQDS-Perform video quality diagnosis, currently diagnosis options for 7016 are：video loss, high brightness, low brightness, contrast, definition, color shift
• Port 9400: PES-Responsible to manage MCD
• Port 8081: PTS
• Port 5080: SIP
• Port 554: RTP

Please look at Setting up the Config page.