Setting up Config System page

This page is located either by typing in http://IPADDRESS/config or by clicking the config icon on the bottom right-hand corner. This will take you to a different login page that will utilize the 'admin' username and default password of '123456'. (The moment you log into the server it will make you change the password and create security questions. Please do the questions this is the only way to recover the login information.)  

Quick Guide:

• TCP/IP will allow you to manipulate the network settings of the server. 
• Recommend to use multi-address for the network mode. This is the only way any of the distribution of the servers can work or hot-standby.  
• LAN/WAN Mapping is where each port is listed. Each port runs on 'TCP/UDP' beside the web port which is 'HTTP'. 
• Each port has certain services of the server it runs. This way, not just one port is handling all the stream services and alarms, etc.  
• If the server will be remotely access all ports need to be open beside the web port that is optional. 
• Once all ports is open on the firewall, please enter the WAN IP address of the network into the 'Router address' section. To find your WAN IP please go to www.canyouseeme.org on the same network as the server. 

Please look at Setting up Network settings & Server Distribution for more info on the Master/Slave setup and hot spare config and N+M settings.